In house studio works, then yes I would use a light meter. Outdoor no.
1> The flash w/modifier usually can't overpower the sun unless it get very close to the subject.
2> It's on E-TTL, so you actually control the power output using flash compensation from your camera, or if you are using 2 groups of lights, then the ST-E2 can adjust the power ratio between the 2 groups.
Every so often, I may turn the flash into M at full power when I know this is what I need, but rarely.
Using light meter + manual setup, you get very consistant light output from your flash, so you are fully in control. Yet, you don't always have the luxury (Time) to take your time. Also, if you subject loss interest, then you won't be able to capture anything good.
For me, I'll pick the TTL setup over manual.. The extra time allow communicate your model. The communication allow your model to understand what you need, and it also allows you to modify their mood, which essentially become part of emotions in your photo.
chobit, do you use distance meter ? or metering device?
librazhy 發表於 2012-5-4 13:18  |